SAE AMS5328D

Steel Castings, Investment 0.80Cr – 1.8Ni – 0.35Mo (0.28 – 0.36C) (SAE 4330 Modified) Annealed
standard by SAE International, 04/04/2013

SAE AMS5121L

Sheet and Strip, Steel (0.90 – 1.04C) (SAE 1095) Annealed
standard by SAE International, 05/10/2019

SAE AMS4976H

Titanium Alloy, Forgings, 6.0Al – 2.0Sn – 4.0Zr – 2.0Mo, Solution and Precipitation Heat Treated
standard by SAE International, 09/14/2012

SAE AMS5719D

Steel Bars, Wire, Forgings, Tubing, Rings, and Extrusions, Corrosion-Resistant 11.8Cr – 2.5Ni – 1.8Mo – 0.33V (0.08 – 0.15C) Annealed, Vacuum Arc or Electroslag Remelted
standard by SAE International, 04/12/2012

SAE AMS4909H

Titanium Alloy, Sheet, Strip, and Plate 5Al 2.5Sn, Extra Low Interstitial Annealed
standard by SAE International, 02/01/2008

SAE AMS4612K

Brass, Naval, Bars and Rods 60.5Cu – 38.5Zn – 0.75Sn Hard Temper (H04)
standard by SAE International, 11/15/2017

SAE AMS5701D

Nickel Alloy, Corrosion and Heat Resistant, Bars, Forgings, and Rings, 41.5Ni 16Cr 37Fe 2.9Cb 1.8Ti, Consumable Electrode or Vacuum Induction Melted, 1800°F (982°C) Solution Heat Treated
standard by SAE International, 02/02/2007

SAE AMS5800G

Nickel Alloy, Corrosion and Heat-Resistant, Welding Wire 54Ni – 19Cr – 11Co – 10Mo – 3.2Ti – 1.5Al – 0.006B Vacuum Induction Melted
standard by SAE International, 08/03/2018

SAE AMS5698G

Nickel Alloy, Corrosion and Heat-Resistant, Wire 72Ni – 15.5Cr – 0.95Cb – 2.5Ti – 0.70Al – 7.0Fe No. 1 Temper, Precipitation Hardenable
standard by SAE International, 12/02/2013

SAE AMS5630J

Steel, Corrosion-Resistant, Bars, Wire, and Forgings, 17Cr 0.52Mo (0.95-1.20C) (SAE 51440C)
standard by SAE International, 10/01/2007