SAE AMS4532G

Copper-Beryllium Alloy, Sheet and Strip, 98Cu 1.9Be, Half Hard (TD02)
standard by SAE International, 02/18/2011

SAE AMS4430

Magnesium Alloy Castings Sand 9 Al 2 Zn as Cast
standard by SAE International, 12/16/2002

SAE AMS5873E

Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate, 65Ni – 15.8Cr – 15.2Mo – 0.30AI – 0.05La, Consumable Electrode Remelted, Solution Heat Treated
standard by SAE International, 10/31/2007

SAE AMS4375L

Sheet and Plate, Magnesium Alloy 3.0Al – 1.0Zn – 0.20Mn (AZ31B-0) Annealed and Recrystallized
standard by SAE International, 03/28/2011

SAE AMS4924F

Titanium Alloy, Bars, Forgings, and Rings 5A1 2.5Sn, Extra Low Interstitial, Annealed
standard by SAE International, 06/01/2007

SAE AMS5602B

Steel, Bars, and Forgings, Low Heat Resistant 5.0cr 0.50mo
standard by SAE International, 01/01/1982

SAE AMS5824E

Steel, Corrosion-Resistant, Welding Wire 17Cr – 7.1Ni – 1.0Al
standard by SAE International, 10/10/2011

SAE AMS5555D

Nickel Wire and Ribbon 99Ni
standard by SAE International, 03/01/2006

SAE AMS5644E

Steel, Bars and Forgings, Corrosion Resistant 17Cr – 7Ni – 1Al (Stabilized: Apr 2017)
standard by SAE International, 04/04/2017

SAE AMS5517L

Steel, Corrosion Resistant, Sheet and Strip 18Cr – 8Ni (SAE 30301) Cold Rolled, 125 ksi (862 MPa) Tensile Strength
standard by SAE International, 05/19/2010