SAE AMS5043

Steel, Sheet and Strip Forming (Special Quality) Low Carbon
standard by SAE International, 12/16/2002

SAE AMS5754N

Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 47.5Ni – 22Cr – 1.5Co – 9.0Mo – 0.60W – 18.5Fe Solution Heat Treated
standard by SAE International, 04/11/2019

SAE AMS5382K

Cobalt Alloy, Corrosion and Heat-Resistant, Investment Castings 54Co – 25.5Cr – 10.5Ni – 7.5W As-Cast
standard by SAE International, 02/07/2019

SAE AMS4972J

Titanium Alloy Bars, Wire, and Rings 8Al – 1Mo – 1V Solution Heat Treated and Stabilized
standard by SAE International, 01/04/2019

SAE AMS5889C

Nickel Alloy, Corrosion and Heat Resistant, Sheet and Strip 54Ni – 22Cr – 12.5Co – 9.0Mo – 1.2Al Consumable Electrode or Vacuum Induction Melted Annealed
standard by SAE International, 12/02/2015

SAE AMS5688M

Steel, Corrosion Resistant, Wire 18Cr – 9.0Ni (302) Spring Temper
standard by SAE International, 01/02/2019

SAE AMS5848E

Steel, Corrosion-Resistant, Bars, Wire, Forgings, Extrusions, Tubing, and Rings Wear and Galling Resistant 8.0Mn – 4.0Si – 17Cr – 8.5Ni – 0.13N Solution Heat Treated
standard by SAE International, 07/10/2018

SAE AMS5697F

Steel, Corrosion-Resistant, Wire 19Cr – 9.5Ni (SAE 30304) Solution Heat Treated
standard by SAE International, 04/16/2012

SAE AMS4460A

Aluminum Alloy, Clad Two Sides Sheet 0.6Mg – 0.35Si – 0.28Cu (No. 24 Brazing Sheet) As Fabricated
standard by SAE International, 06/03/2015

SAE AMS4442H

Magnesium Alloy, Sand Castings 3.2 Rare Earths – 2.5Zn – 0.70Zr (EZ33A-T5) Precipitation Heat Treated
standard by SAE International, 01/04/2019