SAE AMS4459B

Aluminum Alloy, Extrusion 2.7Cu – 1.8Li – 0.7Zn – 0.3Mn – 0.3Mg – 0.08Zr (2099-T81) Solution Heat Treated, Stress Relieved by Stretching 1 to 3% and Aged
standard by SAE International, 08/14/2018

SAE AMS4452D

Magnesium Alloy, Investment Castings 8.7Al 0.70Zn 0.22Mn (AZ 91C-T6) Solution and Precipitation Heat Treated
standard by SAE International, 09/19/2011

SAE AMS5771F

Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 74Ni – 7.0Cr – 16.5 Mo Solution Heat Treated
standard by SAE International, 06/10/2014

SAE AMS4862F

Manganese Bronze, Sand and Centrifugal Castings 63Cu – 24Zn – 6.2Al – 3.8Mn – 3.0Fe High Strength, As Cast
standard by SAE International, 03/23/2016

SAE AMS5683F

Alloy Welding Wire, Corrosion and Heat Resistant, 75Ni – 15.5Cr – 8Fe
standard by SAE International, 03/01/2000

SAE AMS4508H

Copper-Zinc Alloy, Laminated Sheet 70Cu – 30Zn Surface Bonded
standard by SAE International, 03/26/2015

SAE AMS5854B

Nickel Alloy, Corrosion and Heat-Resistant, Bars, Wire, Forgings, and Rings 61Ni – 20.5Cr – 8.5Mo – 3.4Cb(Nb) – 1.3Ti – 5.0Fe Consumable Electrode or Vacuum Induction Melted Solution Heat Treated
standard by SAE International, 05/17/2010

SAE AMS5802D

Iron-Nickel Alloy, Corrosion and Heat-Resistant, Welding Wire 41Fe – 37.5Ni – 14Co – 4.8Cb (Nb) – 1.5Ti Vacuum Melted, Low Expansion
standard by SAE International, 04/06/2011

SAE AMS5404B

Alloy Castings, Investment, Corrosion and Heat Resistant, 59Ni – 12.6Cr – 9.0Co – 1.9Mo – 4.2W – 4.0Ti – 4.2Ta – 3.4Al – 0.015B – 0.10Zr – 0.90Hf, Vacuum Melted, Vacuum Cast, Solution and Precipitation Heat Treated
standard by SAE International, 04/05/2007

SAE AMS5034A

Steel, Welding Wire, 0.95Cr – 0.20Mo (0.28 – 0.33C) (SAE 4130)
standard by SAE International, 05/17/2006