SAE AMS4783F

Cobalt Alloy, High Temperature Brazing Filler Metal, 50Co 8.0Si 19Cr 17Ni 4.0W 0.80B, 2050-2100°F (1121-1149°C) Solidus-Liquidus Range
standard by SAE International, 05/07/2003

SAE AMS5924

Nickel Alloy, Corrosion and Heat-Resistant, 47.5Ni – 22Cr – 1.5Co – 9.0Mo – 0.60W – 18.5Fe Powder for General Applications including Metal Injection Molding and Additive Manufacturing without Special Powder Manufacturing Controls
standard by SAE International, 01/14/2019

SAE AMS5441A

Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings Ni – 18Cr – 2.8Mo – 5.5Cb(Nb) – 0.70Ti – 1.50Al – 10Fe – 9Co – 1W Consumable Electrode Remelted or Vacuum Induction Melted 1775 °F (968 °C) Solution Heat Treated, Precipitation-Hardenable
standard by SAE International, 09/19/2011

SAE AMS4617A

Aluminum Alloy, Extrusions 5.6Zn – 2.5Mg – 1.6Cu – 0.23Cr (7075-T73, 7075-T73511, 7075-T73510) Solution Heat Treated, Stress Relieved by Stretching when required, and Overaged
standard by SAE International, 04/03/2017

SAE AMS4880D

Aluminum Bronze Alloy, Centrifugal and Continuous-Cast Castings 81.5Cu – 10.3Al – 5.0Ni – 2.8Fe Quench Hardened and Temper Annealed (TQ50)
standard by SAE International, 05/03/2018

SAE AMS5841G

Cobalt-Nickel Alloy, Corrosion and Heat-Resistant, Bars 19Cr – 36Co – 25Ni – 7.0Mo – 0.50Cb (Nb) – 2.9Ti – 0.20Al – 9.0Fe Vacuum Induction Plus Vacuum Consumable Electrode Melted Solution Heat Treated for Work Strengthening
standard by SAE International, 06/06/2016

SAE AMS5764E

Steel, Corrosion-Resistant, Bars, Wire, Forgings, Extrusions, and Rings 5.0Mn – 22Cr – 12.5Ni – 2.2Mo – 0.20Cb – 0.30N – 0.20V Solution Heat Treated
standard by SAE International, 10/14/2014

SAE AMS5654G

Steel, Corrosion and Heat Resistant, Bars, Wire, Forgings, Mechanical Tubing, and Rings 18Cr – 11Ni – 0.60Cb (Nb) (347) Premium Aircraft Quality, Consumable Electrode Melted Solution Heat Treated
standard by SAE International, 07/30/2018

SAE AMS5350J

Steel, Corrosion and Moderate Heat-Resistant, Investment Castings 12.5Cr (SAE 51410) Hardened and Tempered
standard by SAE International, 05/25/2011

SAE AMS4931D

Titanium Alloy Bars, Forgings, and Rings, 6Al – 4V Extra Low Interstitial (ELI), Duplex Annealed, Fracture Toughness
standard by SAE International, 09/23/2011