SAE AMS5350J

Steel, Corrosion and Moderate Heat-Resistant, Investment Castings 12.5Cr (SAE 51410) Hardened and Tempered
standard by SAE International, 05/25/2011

SAE AMS4931D

Titanium Alloy Bars, Forgings, and Rings, 6Al – 4V Extra Low Interstitial (ELI), Duplex Annealed, Fracture Toughness
standard by SAE International, 09/23/2011

SAE AMS5658C

Steel Bars, Forgings, and Rings, Corrosion Resistant 15cr 4.5ni 0.30(Cb+Ta) 3.5cu
standard by SAE International, 04/01/1992

SAE AMS5618J

Steel, Corrosion-Resistant, Bars, Wire, and Forgings 17Cr – 0.52Mo (0.95 – 1.20C) (440C) Consumable Electrode Vacuum Melted
standard by SAE International, 01/18/2017

SAE AMS5924

Nickel Alloy, Corrosion and Heat-Resistant, 47.5Ni – 22Cr – 1.5Co – 9.0Mo – 0.60W – 18.5Fe Powder for General Applications including Metal Injection Molding and Additive Manufacturing without Special Powder Manufacturing Controls
standard by SAE International, 01/14/2019

SAE AMS4511A

Copper-Beryllium Alloy Castings 97Cu – 2.1Be – 0.52(Co + Ni) – 0.28Si Solution and Precipitation Heat Treated (TFOO)
standard by SAE International, 02/15/2012

SAE AMS4922C

Titanium Alloy, Seamless, Hydraulic Tubing 15V – 3.0Cr – 3.0Al – 3.0Sn Cold Worked and Precipitation Heat Treated
standard by SAE International, 04/21/2017

SAE AMS4820F

Bearings, Leaded Copper 70Cu ¿¿¿ 28.5Pb Steel Back (Stabilized: Apr 2018)
standard by SAE International, 04/19/2018

SAE AMS5554F

Steel, Corrosion and Heat-Resistant, Seamless Tubing, 16.5Cr – 4.5Ni – 2.9Mo – 0.10N, Annealed
standard by SAE International, 07/22/2011

SAE AMS4611H

Brass, Naval, Bars and Rods 60.5Cu – 38.7Zn – 0.8Sn Half Hard (H02)
standard by SAE International, 04/03/2014