SAE AMS6466G

Steel, Corrosion-Resistant, Welding Wire 5.2Cr ¿¿¿ 0.55Mo (Stabilized: Dec 2017)
standard by SAE International, 12/05/2017

SAE AMS5966B

Nickel Alloy, Corrosion and Heat Resistant, Welding Wire 50Ni – 20Cr – 20Co – 5.9Mo – 2.2Ti – 0.45Al Consumable Electrode or Vacuum Induction Melted
standard by SAE International, 07/10/2013

SAE AMS5046C

Carbon Steel, Sheet, Strip, and Plate (SAE 1020 and 1025) Annealed
standard by SAE International, 05/01/2007

SAE AMS5442A

Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings Ni – 18Cr – 2.8Mo – 5.5Cb(Nb) – 0.70Ti – 1.50Al – 10Fe – 9Co – 1W Consumable Electrode Remelted or Vacuum Induction Melted 1775 °F (968 °C) Solution and Precipitation Heat Treated
standard by SAE International, 09/13/2011

SAE AMS4907K

Titanium Alloy, Sheet, Strip, and Plate 6.0Al – 4.0V, Extra Low Interstitial Annealed
standard by SAE International, 09/26/2013

SAE AMS5659N

Steel, Corrosion Resistant, Bars, Wire, Forgings, Rings, and Extrusions 15Cr – 4.5Ni – 0.30Cb (Nb) – 3.5Cu, Consumable Remelted, Solution Heat Treated, Precipitation Hardenable
standard by SAE International, 09/24/2012

SAE AMS5929

Steel, Corrosion-Resistant, Bars and Forgings 11.5Cr -10Ni – 1.0Al – 0.5Ti – 1.0Cu – 1.0W Vacuum Induction Plus Vacuum Consumable Electrode Melted Solution Heat Treated, Precipitation Hardenable
standard by SAE International, 06/10/2014

SAE AMS5020F

Steel Bars, Forgings, and Tubing, Free-Cutting, 1.5Mn – 0.25Pb (0.32-0.39C) (11L37)
standard by SAE International, 12/15/2008

SAE AMS4777H

Nickel Alloy, Brazing Filler Metal 82Ni – 4.5Si – 7.0Cr – 3.1B – 3.0Fe 1780 to 1830 ¿¿F (971 to 999 ¿¿C) Solidus-Liquidus Range
standard by SAE International, 10/28/2010

SAE AMS4415A

Aluminum Alloy Extrusions 8.9Zn – 2.2Cu – 2.2Mg – 0.15Zr (7136-T76511, -T76510) Solution Heat Treated, Stress-Relieved, Straightened, and Overaged
standard by SAE International, 05/08/2015