SAE AMS5699G

Nickel Alloy, Corrosion and Heat-Resistant, Wire 72Ni – 15.5Cr – 0.95Cb – 2.5Ti – 0.70Al – 7.0Fe Spring Temper, Precipitation Hardenable
standard by SAE International, 12/02/2013

SAE AMS5662M

Nickel Alloy, Corrosion and Heat Resistant, Bars, Forgings, and Rings 52.5Ni 19Cr 3.0Mo 5.1Cb 0.90Ti 0.50Al 18Fe, Consumable Electrode or Vacuum Induction Melted 1775°F (968°C) Solution Heat Treated, Precipitation Hardenable
standard by SAE International, 07/12/2004

SAE AMS4953E

Titanium Alloy Welding Wire 5Al 2.5Sn
standard by SAE International, 11/20/2007

SAE AMS5890E

Nickel, Corrosion and Heat-Resistant, Bars, Forgings, and Extrusions, Thoria Dispersion Strengthened, 2.2Th02, Stress-Relieved
standard by SAE International, 07/16/2009

SAE AMS5030J

Steel, Welding Wire 0.06 Carbon, Maximum
standard by SAE International, 04/03/2013

SAE AMS6361G

Steel Tubing, Seamless 0.95Cr – 0.20Mo (0.28 – 0.33C) (SAE 4130) 125 ksi (862 MPa) Tensile Strength
standard by SAE International, 11/02/2018

SAE AMS5596K

Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, Foil and Plate 52.5Ni – 19Cr – 3.0Mo – 5.1Cb (Nb) – 0.90Ti – 0.50Al – 18Fe Consumable Electrode Remelted or Vacuum Induction Melted 1775 °F (968 °C) Solution Heat Treated
standard by SAE International, 10/12/2012

SAE AMS5210C

Steel Castings, Investment, Electrical Induction Melted, Annealed
standard by SAE International, 07/17/2006

SAE AMS4917J

Titanium Alloy Sheet, Strip, and Plate 13.5V – 11Cr – 3.0Al Solution Heat Treated
standard by SAE International, 06/26/2017

SAE AMS4461

Aluminum Alloy, Sheet and Plate, Alclad 4.4Cu – 1.5Mg – 0.60Mn (Alclad 2024-O, Sheet and Plate) Annealed; or when specified, “As Fabricated” (2024-F)
standard by SAE International, 01/06/2012