SAE AMS6302H

Low-Alloy Steel, Heat-Resistant, Bars, Forgings, and Tubing 0.65Si 1.25Cr 0.50Mo 0.25V (0.28-0.33C)
standard by SAE International, 09/01/2007

SAE AMS6548A

Steel Bars, Forgings, and Tubing 1.0Cr – 3.2Ni – 0.2Mo (0.12 – 0.17C) Premium Aircraft-Quality Electroslag Remelted or Consumable Electrode Vacuum Remelted
standard by SAE International, 06/03/2018

SAE AMS5505E

Steel, Corrosion and Heat Resistant, Sheet, Strip, and Plate 12Cr (SAE 51410 Modified) Ferrite Controlled, Annealed
standard by SAE International, 04/16/2012

SAE AMS4918N

Titanium Alloy, Sheet, Strip, and Plate 6Al – 6V – 2Sn Annealed
standard by SAE International, 10/27/2014

SAE AMS4405

Aluminum Alloy, Alclad Sheet (6156-T4) 1.0Si 0.90Cu 0.60Mn 0.90Mg Solution Heat Treated and Naturally Aged
standard by SAE International, 08/01/2006

SAE AMS4958D

Titanium Alloy Bars and Rods 3Al – 8V – 6Cr – 4Mo – 4Zr Consumable Electrode Melted Solution Heat Treated and Centerless Ground or Peeled and Polished
standard by SAE International, 06/10/2013

SAE AMS4431

Magnesium Alloy, Direct Chill Strand Cast 2.8Nd – 1.4Gd – 0.4Zn – 0.6Zr (EV31A – T6) Solution and Precipitation Heat Treated
standard by SAE International, 05/14/2019

SAE AMS7311G

Piston Rings, Centrifugally-Case Alloyed Iron 0.50Mo – 0.50Cu
standard by SAE International, 09/20/2013

SAE AMS5586H

Nickel Alloy, Corrosion and Heat-Resistant, Welded Tubing 57Ni – 19.5Cr – 13.5Co – 4.2Mo – 2.9Ti – 1.4Al – 0.006B – 0.08Zr Consumable Electrode Remelted or Vacuum Induction Melted, Annealed
standard by SAE International, 01/04/2019

SAE AMS6308E

Steel, Bars and Forgings 0.90Si – 1.0Cr – 2.0Ni – 3.2Mo – 2.0Cu – 0.10V (0.07 – 0.13C) Vacuum Arc or Electroslag Remelted
standard by SAE International, 06/01/2012