Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings Ni 18Cr 2.8Mo 5.5Cb(Nb) 0.70Ti 1.50Al 10Fe 9Co 1W Consumable Electrode Remelted or Vacuum Induction Melted 1775 \mDF (968 \mDC) Solution and Precipitation Heat Treated
standard by SAE International, 09/01/2006
Castings, Structural Investment, Titanium Alloy 6Al – 4V Hot Isostatically Pressed
standard by SAE International, 04/19/2010
Virgin Beryllium Bars, Rods and Shapes
standard by SAE International, 01/01/1961
Steel, Bars 0.95Cr – 0.20Mo (0.28 to 0.33C) (SAE 4130) Normalized
standard by SAE International, 10/10/2013
Steel, Sheet and Strip, 0.25 Carbon, Maximum, Hard Temper
standard by SAE International, 09/22/2005
Titanium Alloy, Forgings 10V – 2Fe – 3Al Consumable Electrode Melted, Single-Step Solution Heat Treated and Overaged 160 ksi (1103 MPa) Tensile Strength
standard by SAE International, 01/15/2015
Steel, Welding Wire 1.0Cr – 1.0Mo – 0.12V (0.18 – 0.23C) Vacuum Melted
standard by SAE International, 07/17/2018
Iron-Nickel Alloy, Strip 49Fe – 5.3Cr – 42Ni – 2.5Ti – 0.55Al Solution Heat Treated, Cold Rolled, 10% Reduction
standard by SAE International, 01/10/2019
Titanium Alloy Wire 13.5V – 11Cr – 3Al Spring Temper
standard by SAE International, 10/04/2012
Titanium Alloy, Sheet, Strip, and Plate 6Al – 6V – 2Sn Annealed
standard by SAE International, 08/22/2018
