SAE AMS7724C

Alloy Sheet and Strip, Sintered Wire Mesh, Corrosion and Heat Resistant 30Fe – 1.5Mn – 21Cr – 20Ni – 20Co – 3.0Mo – 2.5W – 1.0(Cb +Ta) – 0.15N Porous
standard by SAE International, 04/16/2012

SAE AMS6945B

Titanium Alloy, Single Melt, Sheet, Strip, and Plate 6Al – 4V Annealed
standard by SAE International, 04/30/2014

SAE AMS6349D

Steel Bars 0.95Cr – 0.20Mo (0.38 to 0.43C) (SAE 4140) Normalized
standard by SAE International, 02/26/2013

SAE AMS5730

Steel Corrosion and Heat Resistant 19cr 12ni 3.2w 1cb 0.15n
standard by SAE International, 12/16/2002

SAE AMS4530J

Copper-Beryllium Alloy Sheet, Strip, and Plate 98Cu – 1.9Be Solution Heat Treated (TB00)
standard by SAE International, 05/03/2018

SAE AMS5504M

Steel, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 12.5Cr (SAE 51410) Annealed
standard by SAE International, 04/16/2012

SAE AMS6250L

Steel Bars, Forgings, and Tubing, 1.5Cr – 3.5Ni (0.07 – 0.13C) (3310)
standard by SAE International, 05/24/2011

SAE AMS5330E

Steel Castings, Investment 0.80Cr – 1.8Ni – 0.35Mo (0.38 – 0.46C) (SAE 4340 Modified) Annealed (Stabilized: Dec 2015)
standard by SAE International, 12/15/2015

SAE AMS4938A

Forgings, Titanium Alloys Heat-Treated, Finished-Part Properties: Short-Traverse Tensile, Fracture Toughness, and Longitudinal Time-Dependent-Tension
standard by SAE International, 04/24/2017

SAE AMS4872B

Castings, Sand – Aluminum Bronze 85cu 11.2al 3.6fe, as Cast (Cancelled: Jan 1990)
standard by SAE International, 01/01/1990