SAE AMS7724C

Alloy Sheet and Strip, Sintered Wire Mesh, Corrosion and Heat Resistant 30Fe – 1.5Mn – 21Cr – 20Ni – 20Co – 3.0Mo – 2.5W – 1.0(Cb +Ta) – 0.15N Porous
standard by SAE International, 04/16/2012

SAE AMS6945B

Titanium Alloy, Single Melt, Sheet, Strip, and Plate 6Al – 4V Annealed
standard by SAE International, 04/30/2014

SAE AMS6349D

Steel Bars 0.95Cr – 0.20Mo (0.38 to 0.43C) (SAE 4140) Normalized
standard by SAE International, 02/26/2013

SAE AMS5730

Steel Corrosion and Heat Resistant 19cr 12ni 3.2w 1cb 0.15n
standard by SAE International, 12/16/2002

SAE AMS4892C

Alloy Castings, Corrosion and Heat-Resistant 66Ni – 29Cu – 4.0Si As Cast
standard by SAE International, 02/09/2012

SAE AMS4464

Aluminum Alloy Plate (2624-T351) 4.1Cu – 1.4Mg – 0.6Mn Solution Heat Treated, Cold Worked and Naturally Aged
standard by SAE International, 01/06/2012

SAE AMS6250L

Steel Bars, Forgings, and Tubing, 1.5Cr – 3.5Ni (0.07 – 0.13C) (3310)
standard by SAE International, 05/24/2011

SAE AMS4712G

Copper Alloy, Wire 65Cu – 35Zn Annealed (O61)
standard by SAE International, 08/14/2017

SAE AMS6284

Steel Tubing (Seamless for Machined Parts) .55ni .50cr .25mo (.35 – .38c) Heat-Treated (125,000 Tensile Strength)
standard by SAE International, 12/16/2002

SAE AMS4940B

Titanium Sheet, Strip, and Plate Commercially Pure Annealed, 25.0 ksi (172 MPa) Yield Strength
standard by SAE International, 09/25/2012