Steel, Corrosion-Resistant, Bars, Wire, Forgings, Rings, and Extrusions, 13Cr – 8.0Ni – 2.2Mo – 1.1Al, Vacuum Induction Plus Consumable Electrode Melted, Solution Heat Treated, Precipitation Hardenable
standard by SAE International, 01/24/2002
Brass Wire, Tinned 65Cu – 35Zn Annealed (061)
standard by SAE International, 09/27/2012
Nickel Alloy, Corrosion and Heat-Resistant, Sheet and Strip 52.5Ni – 19Cr – 3.0Mo – 5.0Cb – 0.90Ti – 0.50Al – 18Fe Vacuum Induction and Consumable Electrode Melted, Solution Heat Treated, Precipitation Hardenable
standard by SAE International, 02/15/2008
Steel, Corrosion and Heat Resistant, Welding Wire 9.0Mn – 20Cr – 6.2Ni – 0.20N
standard by SAE International, 11/12/2019
Steel Castings, Vacuum Melted, Vacuum Cast, Investment, Corrosion-Resistant 13Cr – 8.0Ni – 2.2Mo – 1.1Al (195 ksi (1344 MPa) Tensile Strength (Condition H1000) Homogenized, Solution, and Precipitation Heat Treated
standard by SAE International, 10/10/2018
Chromium Plating (Electrodeposited)
standard by SAE International, 01/23/2008
Steel, Bars, Forgings, and Tubing 0.80Cr – 1.8Ni – 0.25Mo (0.38 – 0.43C) (SAE 4340) Special Aircraft Quality Cleanliness Normalized and Tempered
standard by SAE International, 12/06/2016
Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 57Ni 19.5Cr 13.5Co 4.3Mo 3.0Ti 1.4Al 0.006B 0.05Zr Consumable Electrode or Vacuum Induction Melted 1825 to 1900°F Solution Heat Treated
standard by SAE International, 10/06/2008
Brass Tubing, Seamless 66.5Cu – 33Zn – 0.45Pb Annealed
standard by SAE International, 10/01/2014
Sheet and Plate, Magnesium Alloy 3.0Al – 1.0Zn – 0.20Mn (AZ31B-O) Annealed and Recrystallized
standard by SAE International, 06/28/2017
