SAE AMS4599

Aluminum Alloy, Sheet and Plate 6.3Cu – 0.30Mn – 0.06Ti – 0.10V – 0.18Zr Solution and Precipitation Heat Treated (2219 -T81/-T851)
standard by SAE International, 07/08/2011

SAE AMS5904C

Steel, Corrosion-Resistant, Sheet and Strip 18Cr – 9.0Ni (302) Cold Rolled, 1/2 Hard, 150 ksi (1034 MPa) Tensile Strength
standard by SAE International, 08/17/2018

SAE AMS7273D

Rubber: Fluorosilicone (FVMQ) High Temperature Fuel and Oil Resistant For Seals In Fuel Systems and Specific Engine Oil Systems
standard by SAE International, 06/07/2011

SAE AMS6385K

Steel Sheet, Strip, and Plate, Low Alloy, Heat-Resistant 0.65Si – 1.25Cr – 0.50Mo – 0.25V (0.27 – 0.33C)
standard by SAE International, 12/03/2015

SAE AMSQQA250/28B

Aluminum Alloy, 7011 Alclad 7178 Plate and Sheet
standard by SAE International, 04/05/2007

SAE AMS5132K

Steel, Bars 0.90 – 1.03C
standard by SAE International, 04/09/2012

SAE AMSDTL23053/7A

Insulation Sleeving, Electrical, Heat Shrinkable, Polyethylene Terephthalate, Non-Crosslinked
standard by SAE International, 08/29/2012

SAE AMS4924G

Titanium Alloy Bars, Forgings, and Rings, 5Al – 2.5Sn, Extra Low Interstitial, Annealed
standard by SAE International, 09/13/2011

SAE AMS4442G

Magnesium Alloy Sand Castings 3.2 Rare Earths – 2.5Zn – 0.70Zr (EZ33A-T5) Precipitation Heat Treated
standard by SAE International, 06/27/2012

SAE AMSPRF46194B

Foam, Rigid, Structural, Closed Cell (Stabilized: Sep 2016)
standard by SAE International, 09/01/2016