SAE AMS5904C

Steel, Corrosion-Resistant, Sheet and Strip 18Cr – 9.0Ni (302) Cold Rolled, 1/2 Hard, 150 ksi (1034 MPa) Tensile Strength
standard by SAE International, 08/17/2018

SAE AMS6327L

Steel Bars and Forgings 0.50Cr – 0.55Ni – 0.25Mo (0.38 – 0.43C) (SAE 8740) Heat Treated, 125 ksi (862 MPa) Tensile Strength
standard by SAE International, 09/22/2017

SAE AMS5781D

Steel Welding Electrodes, Covered, Corrosion and Moderate Heat Resistant 15.5cr 4.5ni 2.9mo 0.10n
standard by SAE International, 10/01/2001

SAE AMS5580L

Nickel Alloy, Corrosion and Heat-Resistant, Seamless Tubing 74Ni – 15.5Cr – 8.0Fe Annealed
standard by SAE International, 07/16/2015

SAE AMS4991E

Titanium Alloy Castings, Investment 6Al – 4V Hot Isostatic Pressed, Anneal Optional
standard by SAE International, 04/24/2014

SAE AMS7252C

Nuts, Self-Locking, Steel High Strength, All Metal, 450¿¿F Use, Unified "J" (MIL-S-8879) Thread Form
standard by SAE International, 10/01/1990

SAE AMS6421G

Steel, Bars, Forgings, and Tubing 0.80Cr – 0.85Ni – 0.20Mo – 0.003B (0.35 – 0.40C) (Modified 98B37)
standard by SAE International, 04/18/2016

SAE AMS7479E

Bolts and Screws, Steel, Corrosion and Heat Resistant Heat Treated, Roll Threaded, 1650¿¿F (898.9¿¿C) Solution and Precipitation Heat Treated
standard by SAE International, 01/01/1991

SAE AMS6470P

Steel, Nitriding, Bars, Forgings and Tubing 1.6Cr – 0.35Mo – 1.13Al (0.38 – 0.43C) (135 Mod)
standard by SAE International, 08/03/2018

SAE AMS5709H

Nickel Alloy, Corrosion and Heat-Resistant, Bars and Forgings 58Ni – 19.5Cr – 13.5Co – 4.3Mo – 3.0Ti – 1.4Al – 0.05Zr – 0.006B Consumable Electrode or Vacuum Induction Melted 1975 ¿¿F (1079 ¿¿C) Solution, Stabilization, and Precipitation Heat Treated
standard by SAE International, 12/02/2013