Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 52.5Ni – 19Cr – 3.0Mo – 5.1Cb (Nb) – 0.90Ti – 0.50Al – 18Fe Consumable Electrode or Vacuum Induction Melted 1775 °F (968 °C) Solution and Precipitation Heat Treated
standard by SAE International, 07/12/2004
Aluminum Alloy, Sheet and Plate, Alclad 4.4Cu – 1.5Mg – 0.60Mn (Alclad 2024-O, Sheet and Plate) Annealed; or when specified, “As Fabricated†(2024-F)
standard by SAE International, 03/04/2018
Titanium Alloy Powder 6Al – 4V
standard by SAE International, 06/12/2017
Steel Bars, Forgings and Tubing 1.75Cr – 4.0Ni – 0.5Mo – (0.35 – 0.40C) Premium Aircraft Quality Consumable Electrode Vacuum Remelted
standard by SAE International, 06/03/2018
Steel, Maraging, Bars, Forgings, Tubing, and Rings 18.5Ni 12.0Co 4.9Mo 1.40Ti 0.10Al Double Vacuum Melted, Annealed
standard by SAE International, 02/01/2008
Steel, Bars, Forgings, and Tubing 0.50Cr – 0.12Mo (0.89 – 1.01C)
standard by SAE International, 05/24/2011
Steel, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 18Cr – 10.5Ni – 0.80Cb (347) Solution Heat Treated
standard by SAE International, 11/05/2018
Titanium Alloy Bars, Forgings, and Forging Stock 5Al – 2.5Sn, Extra Low Interstitial Annealed
standard by SAE International, 07/16/2015
Steel, Bars, Forgings, and Tubing 1.05Cr – 0.55Ni – 1.0Mo – 0.11V (0.45 – 0.50C) (D6AC) Vacuum Consumable Electrode Remelted
standard by SAE International, 05/30/2012
Inserts, Thread Form, Corrosion Resistant Steel 18cr 9.2ni
standard by SAE International, 10/01/1990
