SAE AMS7897C

Tungsten Forgings, Pressed, Sintered, and Forged
standard by SAE International, 07/25/2002

SAE AMS4466A

Aluminum Alloy, Sheet and Plate, Alclad 4.4Cu – 1.5Mg – 0.60Mn (Alclad 2024, -T361 Sheet & Plate) Solution Heat Treated, 6% Cold Worked and Naturally Aged
standard by SAE International, 09/13/2017

SAE AMS5805G

Steel, Corrosion and Heat Resistant, Welding Wire 15Cr 25.5Ni 1.2Mo 2.1Ti 0.004B 0.30V, Vacuum Induction Melted, Environment Controlled Packaged ( Reaffirmed: Oct 2006 )
standard by SAE International, 11/01/2001

SAE AMS5705E

Steel, Corrosion and Heat Resistant, Bars and Forgings 2.5si 12.5si 8.0ni Annealed
standard by SAE International, 09/04/2002

SAE AMST8506B

Tubing, Steel, Corrosion-Resistant, (304), Annealed, Seamless and Welded
standard by SAE International, 08/24/2007

SAE AMS5537J

Cobalt Alloy, Corrosion and Heat-Resistant, Sheet, Strip, Foil, and Plate 52Co – 20Cr – 10Ni – 15W Solution Heat Treated
standard by SAE International, 12/07/2017

SAE AMS5376H

Alloy, Corrosion and Heat Resistant, Investment Castings 30Fe – 21Cr – 20Ni – 20Co – 3.0Mo – 2.5W – 1.0Cb – 0.15N As Cast
standard by SAE International, 05/14/2019

SAE ARP1080

Frequency Weighing Network for Approximation of Perceived Noise Level for Aircraft Noise
standard by SAE International, 05/28/1991

SAE AMS6415T

Steel, Bars, Forgings, and Tubing 0.80Cr – 1.8Ni – 0.25Mo (0.38 – 0.43C) (SAE 4340)
standard by SAE International, 07/02/2012

SAE AMS5896B

Steel, Corrosion and Heat-Resistant, Seamless or Welded Hydraulic Tubing 18.5Cr – 10.5Ni – 0.55Ti (321) Solution Heat Treated and Cold Drawn, 1/8 Hard Temper
standard by SAE International, 12/02/2015