SAE AMS6331A

Steel, Welding Wire, 0.50Cr 0.55Ni 0.20Mo (0.33 0.38C) Vacuum Melted, Environment Controlled Packaging ( Reaffirmed: May 1995 )
standard by SAE International, 07/01/1991

SAE AMS5840E

Steel, Corrosion and Heat Resistant, Welding Wire 13Cr – 8.0Ni – 2.3Mo – 1.1Al Vacuum Melted
standard by SAE International, 04/24/2017

SAE AMS5774E

Steel, Corrosion and Heat-Resistant, Welding Wire 16.5Cr – 4.5Ni – 2.9Mo – 0.10N
standard by SAE International, 12/02/2015

SAE AMST7081A

Tube, Aluminum Alloy, Seamless, Round, Drawn, 6061, Aircraft Hydraulic Quality
standard by SAE International, 09/13/2007

SAE AMS7210H

Cotter Pins, Steel, Corrosion-Resistant 18cr 9.5ni
standard by SAE International, 10/01/1993

SAE AMS6467E

Steel Welding Electrodes, Covered, 5Cr – 0.55Mo
standard by SAE International, 08/28/2008

SAE AMS4640H

Aluminum Bronze, Bars, Rods, Shapes, Tubes, and Forgings 81.5Cu – 10.0Al – 4.8Ni – 3.0Fe Drawn and Stress Relieved (HR50) or Temper Annealed (TQ50)
standard by SAE International, 05/03/2018

SAE AMS6322R

Steel Bars, Forgings, and Rings 0.50Cr ¿¿¿ 0.55Ni ¿¿¿ 0.25Mo (0.38 ¿¿¿ 0.43C) (SAE 8740)
standard by SAE International, 08/14/2018

SAE AMS7255C

Rings, Sealing, Tetrafluoroethylene/Propylene Rubber (Fepm) Hydraulic Fluid and Synthetic Oil Resistance 70 to 80
standard by SAE International, 11/17/2003

SAE AMS4598A

Copper Nickel Tin Alloy, Mechanical Tube 77Cu – 15Ni – 8Sn Solution Annealed and Spinodal Hardened (TX 00)
standard by SAE International, 09/14/2012