SAE AMSC81562

Coatings, Cadmium, Tin-Cadmium and Zinc (Mechanically Deposited)
standard by SAE International, 10/03/2011

SAE AMS4846B

Tin Bronze Castings, Sand and Centrifugal 86.5cu 11.2sn 2.0zn as Cast
standard by SAE International, 02/01/2001

SAE ARP 1625A

Cold Gas Systems, Missile or Projectiles Design, Installation, Tests and Requirements for ( Reaffirmed: Nov 1991 May 2002 )
standard by SAE International, 07/01/1981

SAE AMS6433G

Steel, Sheet, Strip, and Plate 0.75Mn – 0.78Cr – 1.8Ni – 0.35Mo – 0.20V (0.33 – 0.38C) (4335 Mod)
standard by SAE International, 07/28/2015

SAE AMS5069G

Steel Bars, Forgings, and Tubing 0.15 – 0.20C (SAE 1018) (Stabilized: Mar 2016)
standard by SAE International, 03/31/2016

SAE AMS6421F

Steel, Bars, Forgings, and Tubing, 0.80Cr – 0.85Ni – 0.20Mo – 0.003B (0.35 – 0.40C) (Modified 98B37)
standard by SAE International, 05/24/2011

SAE AMS5903B

Steel, Corrosion-Resistant, Sheet, Strip, and Plate 18Cr – 9.0Ni (SAE 30302) Cold Rolled, 1/4 Hard, 125 ksi (862 MPa) Tensile Strength
standard by SAE International, 04/16/2012

SAE AMS5552H

Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 46Fe ¿¿¿ 20.5Cr ¿¿¿ 32Ni ¿¿¿ 1.1Ti Annealed (Stabilized: Jul 2018)
standard by SAE International, 07/18/2018

SAE AMS4842F

Castings, Leaded Bronze, Sand and Centrifugal 80Cu – 10Sn – 9.5Pb As Cast
standard by SAE International, 09/07/2018

SAE AMS7848C

Tantalum Alloy, Bars and Rods, 90Ta – 10W
standard by SAE International, 06/21/2006