SAE AMS5642K

Steel, Corrosion and Heat-Resistant, Bars, Wire, and Forgings 18Cr – 10.5Ni – 0.60Cb Free-Machining, Solution Heat Treated
standard by SAE International, 11/27/2013

SAE AMS5040M

Steel, Sheet and Strip, 0.15 Carbon, Maximum Deep Forming Grade
standard by SAE International, 05/18/2006

SAE AMS5808C

Steel, Corrosion and Heat-Resistant, Welding Wire 19Cr – 13Ni – 2.5Mo High Ferrite Grade, Trace Element Controlled
standard by SAE International, 04/13/2012

SAE ARP1524

Surface Preparation and Priming of Aluminum Alloy Parts for High Durability Structural Adhesive Bonding
standard by SAE International, 04/01/1978

SAE AMS4930H

Titanium Alloy Bars, Wire, Forgings, and Rings 6Al – 4V, Extra Low Interstitial Annealed
standard by SAE International, 01/15/2015

SAE ARP1202B

Balancing Machines, Dynamic, Ball Type Slave Bearings for Rotor Support (Stabilized: Apr 2019)
standard by SAE International, 04/25/2019

SAE AMS4785J

Gold-Palladium-Nickel Alloy, Brazing Filler Metal, High Temperature 30Au – 34Pd – 36Ni 2075 to 2130 ¿¿F (1135 to 1166 ¿¿C) Solidus-Liquidus Range
standard by SAE International, 12/03/2015

SAE AMS7719D

Nickel-Iron Alloy, Magnetic, Sheet and Strip, 50Ni – 50Fe, Stamping Quality, Half-Hard Temper
standard by SAE International, 11/28/2001

SAE AMS5751F

Alloy Bars, Forgings, and Rings, Corrosion and Heat Resistant 54Ni – 17.5Cr – 16.5Co – 4.0Mo – 2.9Ti – 2.9Al – 0.006B Solution, Stabilization, and Precipitation Heat Treated Consumable Electrode or Vacuum Induction Melted (Stabilized: Apr 2017)
standard by SAE International, 04/06/2017

SAE AMSS13165A

Shot Peening of Metal Parts
standard by SAE International, 12/17/2007