Steel Bars, Wire and Forgings 10 Co – 7 Mo – 6 V – 6 W – 4 Cr (2.2 – 2.4C) Premium Aircraft-Quality for Bearing Applications Inert Gas Atomized and Hot Isostatically Pressed Consolidated
standard by SAE International, 02/20/2013
Nickel Alloy, Corrosion and Heat Resistant, Welding Wire 50Ni – 20Cr – 20Co – 5.9Mo – 2.2Ti – 0.45AI Consumable Electrode or Vacuum Induction Melted
standard by SAE International, 03/26/2019
Steel, Corrosion and Heat Resistant, Covered Welding Electrodes 25cr 20ni
standard by SAE International, 06/01/2000
Magnesium Alloy Castings, Sand 6.0Al – 3.0Zn (AZ63-T6) Solution and Precipitation Heat Treated
standard by SAE International, 08/01/1992
Aluminum Alloy, Hand Forgings 7.5Zn – 1.6Cu – 1.5Mg – 0.12Zr (7085-T7452) Solution Heat Treated, Compression Stress-Relieved, and Overaged
standard by SAE International, 09/19/2019
Shot Peening of Metal Parts
standard by SAE International, 12/17/2007
Steel, Corrosion and Heat-Resistant, Welding Wire 13Cr – 2.0Ni – 3.0W
standard by SAE International, 12/05/2017
Steel, Bars and Forgings, Nitriding 1.6Cr – 0.35Mo – 1.1Al (0.38 – 0.43C) (135 Mod) Hardened and Tempered, 112 ksi (772 MPa) Tensile Strength
standard by SAE International, 07/29/2014
Aluminum Alloy, Coiled Sheet 4.4Cu – 1.5Mg – 0.60Mn (2024-T4) Solution Treated
standard by SAE International, 05/05/2014
Aluminum Alloy, Sheet and Plate, Alclad 4.4Cu – 1.5Mg – 0.60Mn (Alclad 2024, -T3 Sheet, -T351 Plate) Solution Heat Treated, Cold Worked and Naturally Aged
standard by SAE International, 12/19/2011
