SAE ARP1279

STANDARD INDOOR METHOD OF COLLECTION AND PRESENTATION OF THE BARE TURBOSHAFT ENGINE NOISE DATA FOR USE IN HELICOPTER INSTALLATIONS (Noncurrent: Jun 1985)
standard by SAE International, 06/01/1985

SAE AMS5879C

Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Foil, 62Ni – 21.5Cr – 9.0Mo – 3.7Cb, Cold Rolled and Annealed
standard by SAE International, 11/21/2002

SAE AMS5708K

Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 58Ni 19.5Cr 13.5Co 4.3Mo 3.0Ti 1.4Al Consumable Electrode or Vacuum Induction Melted 1975°F (1079°C) Solution Heat Treated
standard by SAE International, 03/27/2008

SAE AMS5333G

Steel, Investment Castings 0.50Cr – 0.55Ni – 0.25Mo (0.11 – 0.17C) (SAE 8615) Normalized
standard by SAE International, 09/18/2017

SAE ARP 820

Physical and Performance Tests for Type II (-65 to +275 \mDF) O-Ring Packings, 3000 psi Hydraulic Service ( Reaffirmed: Jul 1992 Dec 2007 )
standard by SAE International, 08/10/1964

SAE ARP4120C

Foldable On-Board Wheelchairs for Passengers with Disabilities (Stabilized: Jan 2013)
standard by SAE International, 01/21/2013

SAE AMS6355L

Steel Sheet, Strip, and Plate 0.50cr 0.55ni 0.20mo (0.28-0.33c)
standard by SAE International, 01/01/1991

SAE AMS6324H

Steel Bars, Forgings, and Tubing, 0.65Cr – 0.70Ni – 0.25Mo (0.38 – 0.43C) (SAE 8740 Modified)
standard by SAE International, 06/16/2010

SAE AMS5832H

Nickel Alloy, Corrosion and Heat Resistant, Welding Wire 52.5Ni – 19Cr – 3.0Mo – 5.1Cb(Nb) – 0.90Ti – 0.50Al – 18Fe Consumable Electrode or Vacuum Induction Melted
standard by SAE International, 12/04/2015

SAE AMS5643/H1025A

Steel, Corrosion-Resistant, Bars, Wire, Forgings, Tubing and Rings 16Cr – 4.0Ni – 0.30Cb (Nb) – 4.0Cu Solution and Precipitation Heat Treated (H1025)
standard by SAE International, 12/23/2014