SAE AMS6373G

Steel, Welded Tubing, 0.95Cr – 0.20Mo (0.28 – 0.33C) (SAE 4130)
standard by SAE International, 05/17/2006

SAE AMS6528D

Steel, Bars 0.95Cr – 0.20Mo (0.28 – 0.33C) (SAE 4130) Special Aircraft Quality Cleanliness Normalized
standard by SAE International, 08/17/2017

SAE AMS4597

Cooper-Nickel-Tin Alloy, Bars and Rods 77Cu 15Ni 8Sn Solution Annealed, Cold Finished and Spinodal Hardened (TX TS)
standard by SAE International, 08/01/2006

SAE ARP4102/7

Electronic Displays
standard by SAE International, 07/10/2007

SAE AMS5879C

Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Foil, 62Ni – 21.5Cr – 9.0Mo – 3.7Cb, Cold Rolled and Annealed
standard by SAE International, 11/21/2002

SAE AMS4725F

Copper-Beryllium Alloy Wire 98Cu – 1.9Be Solution Heat Treated (Stabilized: Jan 2018)
standard by SAE International, 01/02/2018

SAE AMS4466

Aluminum Alloy, Sheet and Plate, Alclad 4.4Cu – 1.5Mg – 0.60Mn (Alclad 2024, -T361 Sheet & Plate) Solution Heat Treated, 6% Cold Worked and Naturally Aged
standard by SAE International, 12/12/2011

SAE AMS5708K

Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 58Ni 19.5Cr 13.5Co 4.3Mo 3.0Ti 1.4Al Consumable Electrode or Vacuum Induction Melted 1975°F (1079°C) Solution Heat Treated
standard by SAE International, 03/27/2008

SAE ARP1279

STANDARD INDOOR METHOD OF COLLECTION AND PRESENTATION OF THE BARE TURBOSHAFT ENGINE NOISE DATA FOR USE IN HELICOPTER INSTALLATIONS (Noncurrent: Jun 1985)
standard by SAE International, 06/01/1985

SAE ARP 820

Physical and Performance Tests for Type II (-65 to +275 \mDF) O-Ring Packings, 3000 psi Hydraulic Service ( Reaffirmed: Jul 1992 Dec 2007 )
standard by SAE International, 08/10/1964