SAE AMS7274J

Rubber: Butadiene-Acrylonitrile (NBR) 65 to 75 Hardness, For Elastomeric Seals in Aircraft Engine Oil Systems
standard by SAE International, 05/08/2014

SAE AMSQQA200/6B

Aluminum Alloy 5454, Bar, Rod, Shapes, Tube, and Wire, Extruded
standard by SAE International, 09/28/2012

SAE AMS7379

Rubber: Fluorocarbon Elastomer (FKM) 70 to 80 Hardness, Low Temperature Sealing Tg ¿¿¿40 ¿¿F (¿¿¿40 ¿¿C) For Elastomeric Seals in Aircraft Engine Oil, Fuel and Hydraulics Systems
standard by SAE International, 07/16/2008

SAE AMS6495B

Steel Bars, Forgings, and Tubing 1.0Cr ¿¿¿ 2.50Ni ¿¿¿ 2.0Mo ¿¿¿ 1.10Si (0.10 ¿¿¿ 0.20C) Premium Aircraft-Quality Electroslag Remelted or Consumable Electrode Vacuum Remelted
standard by SAE International, 07/06/2016

SAE ARP5369B

Guidelines for Wire Identification Marking Using the Hot Stamp Process (Stabilized: Dec 2016)
standard by SAE International, 12/01/2016

SAE ARP1953B

Acceptance Test Procedures and Standards to Ensure Clean Fuel System Components
standard by SAE International, 11/25/2014

SAE ARP1907C

Automatic Braking Systems
standard by SAE International, 01/25/2016

SAE AMS7232H

Alloy Rivets, Corrosion and Heat Resistant, 74ni 15.5cr 8.0fe
standard by SAE International, 10/01/1990

SAE AMS5872F

Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 48Ni – 20Cr – 20Co – 5.9Mo – 2.2Ti – 0.45Al Consumable Electrode or Vacuum Induction Melted Solution Heat Treated
standard by SAE International, 01/04/2019

SAE ARP5783

Health and Usage Monitoring Metrics Monitoring the Monitor
standard by SAE International, 05/03/2018